Tuesday, January 25, 2022

mcgyver

I was wondering why the drawer in the kitchen would kinda sag whenever I pushed the drawer in.

Well, when I took the drawer out, I found out that the piece of wood attached to the “rail” for the drawer was not connected to anything! 

Just balancing on that piece of wood attached to the “wall”, so every time you push in the drawer it would waiver to the left or right…

AND the “wall” that the tiny piece of wood is attached to, moved when pressed upon too…sheesh

Since I am not sure what is behind the “wall”, I didn’t want to chance pounding any nails or putting screws through it…

So, instead I mcgyvered it with 2 thumbtacks, one on the left and one on the right…

At least now the “rail” doesn’t move and the drawer doesn’t feel like it is sagging.

5 comments:

  1. good job! it looks like the wood is just glued on too, so yah, safer not to pound a nail.
    v

    ReplyDelete
  2. crossing finger this stays nicely V:)

    Take care.
    Kat

    ReplyDelete
  3. Thanks Kirk:)

    Thanks Jalna!

    Take care you two.
    Kat

    ReplyDelete

We appreciate your comments, we don't appreciate spam. All comments will be looked over. Hurtful, rude or ones that link to advertisements will be deleted.
Thanks for stopping by!